用户:
密码:
 
 
首页> 产品介绍 >>
 

Material Safety Data Sheet (MSDS)
 Industrial  Sodium Hydrosulfide  (NaHS)  [HS Code: 28301090] 

HENAN YINDU CHEMICAL CO.,LTD
WWW.YINDUCHEM.COM

Section 1: CHEMICAL PRODUCT and COMPANY IDENTIFICATION 
1.1 Product Name ................................................Sodium Hydrosulfide
                  Chemical name………………………sodium hydrogen sulfide
               Chemical Family .................................Inorganic salt
               Synonyms ............................................Sodium Sulfhydrate
               Molecular formula ...............................NaHS• H2O

1.2 Manufacturer ......................................... Henan Yindu Chemical CO.,LTD
           TEL ..........................…:0086-0372-5956163  
  
         FAX…………………
0086-0372-5956163                                
        Address…………… Industrial road.  QiXian. HeBi City. HeNan Province. China
         Post Code………… 456750

1.3 Emergency Contact ……...................... 0086-0372-5956163   
1.4 Code of technology Specification…………….CSDS/DH03-2004
1.5 efficient date…………………….Y:2006  M: 11   D: 1
1.6  Emergency phone of China……………..0532-3889090;    0532-3889191

section 2: COMPOSITION, INFORMATION ON INGREDIENTS
 
2.1 Chemical Ingredients (% by wt.)
     pure(      )                  mixture(
     )

    Chemical  name……………………Sodium hydrosulfide   
     injurant Ingredients___________CAS No.______________Content
     Sodium hydrosulfide__________
16721-80-5______________70--75%
     water-----------------------------------------
7732-18-5----------------------------------25--30%

  Section 3: HAZARDS IDENTIFICATION 
 
                           Class: 8.2 Corrosive

                              U N No.: 2949
                             Imco Code Page: 8225

 Incursion approach……………. EYE, SKIN CONTACT, SKIN ABSORPTION, INGESTION,   INHALATION
health harm……….. strong thrill and
Corrosive. Catalyze eye and breath. erode  
               nasal cavity ,skin and eye. Burn if touch, character:
               contact cause fat to  saponification, come into being
               compound of solubility ,then further damaging; suck
               cause enteron Burn, mucous membrane rot, bleed and shock.
               circumstance harm…………pollution of water. Blast. Apyrous.strong
               Corrosive and thrill.burn body.
section 4  FIRST AID MEASURES 
4.1  EYES: Immediately flush with large quantities of water for 30 minutes.  Hold eyelids apart during irrigation to insure thorough flushing of the entire area of the eye.  Obtain immediate medical attention.
 4.2  SKIN: Immediately flush with large quantities of water for 30 minutes.  Remove contaminated clothing under a safety shower.  Obtain immediate medical attention  
4.3  INGESTION: DO NOT INDUCE VOMITING.  If victim is conscious, immediately give 2 to 4 glasses of water.  If vomiting does occur, repeat fluid administration.  Obtain immediate medical attention.  
4.4  INHALATION: Remove victim from contaminated atmosphere.  If breathing is labored, administer oxygen.  If breathing has ceased, clear airway and start mouth to mouth resuscitation.  If heart has stopped beating, external heart massage should be applied.  Obtain immediate medical attention.

Section 5: FIRE FIGHTING MEASURES
 
 
5.1  harm character…. Apyrous, strong Corrosive.
   Release sulfureted hydrogen( H2S) if reaction with acid.

 
    FLASH POINT: Not flammable  METHOD USED: NA
 5.2  harmful burning production …………. sulfur dioxide
 5.3   
Method of extinguishing a fire………. Water, sand earth, foam and carbon dioxide. 
5.4  notice of extinguishing a fire …………splash of water and others
      cause burn body
 

Section 6 :  ACCIDENTAL RELEASE MEASURES

6.1     Small release: Confine and Absorb small releases on sand earth or other inert absorbent.
 Oxidize residual reactive sulfides with a weak(3-5%) hydrogen peroxide solution.

6.2     Large release: Wear proper protective equipment. Confine area to qualified personnel.
 Shut off release if safe to do so .Dike spill area to prevent runoff into sewers,
drains(potential explosive mixtures of hydrogen sulfide in confined spaces) or
surface waterways(potential aquatic toxicity). Recover as much of the solution as possible.
 Treat remaining material as a small release(above).

 


Section 7: HANDLING and STORAGE 
7.1 notice of Handling:  Wear proper protective equipment (See Section 8). Avoid breathing product vapors.  Avoid contact with skin and eyes.  Use only in a well ventilated area.  Dilute product only in enclosed containers.  Wash thoroughly after handling.

7.2 notice of Storage:  Store in well ventilated areas.  Do not store combustibles in the area of storage vessels.  Keep away from any sources of heat or flame.  Store tote and smaller containers out of direct sunlight at moderate temperatures [<80º F (27º C)].   

 Section8: EXPOSURE CONTROLS, PERSONAL PROTECTION 
          Allowable upmost chroma………MAC(mg/m3):0.2
8.1 method of  inspect……………titration of acid and alkali,  luminosity of flame.
8.2  ENGINEERING CONTROLS: Use adequate exhaust ventilation to prevent inhalation of product vapors.  Where feasible scrub process or storage vessel vapors with caustic solution. Maintain eyewash/safety shower in areas where chemical is handled.

8.3  RESPIRATORY PROTECTION: If working near open container or storage vessel opening or open tank truck dome cover, wear self-contained breathing apparatus, pressure demand, MSHA/NIOSH (approved or equivalent).
8.4  SKIN PROTECTION: Neoprene rubber gloves, chemical suit and boots should be worn to prevent contact with the liquid.  Wash contaminated clothing prior to reuse.  Contaminated leather shoes cannot be cleaned and should be discarded.
8.5  EYE PROTECTION: Chemical goggles and a full face shield.
8.6 BODY PROTECTION:
 Neoprene rubber dress.
8.7 HAND PROTECTION:  Neoprene rubber gloves
8.8 OTHERS:  At workshop  forbid smoking , taking food, drinking. wash hands before
              eating. Maintain eyewash/safety shower in areas where chemical is  handled.

  Section 9: PHYSICAL and CHEMICAL PROPERTIES 
9.1   APPEARANCE:   Yellowish Flake
9.2  PH value:    N/A
9.3  melting point(
):  about  55
9.4  relative density (Water=1): 1.79
9.5 relative steam density ( Water=1): N/A
9.6   saturation VAPOR PRESSURE  (Kpa): N/A
9.7 critical temperature(
): N/A
9.8 critical  pressure (mpa): N/A
9.9 flash point(
):  N/A
9.10 upper limit of exploding %(v/v): N/A
9.11 lower limit of exploding %(v/v): N/A
9.12 burn temperature
(): N/A
9.13 resolvable:
soluble in water and alcohol
9.14 main application: dyeing , leather produce, fertilizer, man-made fibre, copper mine.
             management of  waste water.
9.15 boiling point
(℃):about 115
9.16
Oder : "Rotten egg"  oder

 Section 10: STABILITY and REACTIVITY 
10.1  STABILITY:  easily being deliquescent, Melting point decompose out hydrogen sulfide.
10.2  KEEP AWAY: STRONG ACID , flammable, water, peroxide.
10.3  AVOID: moist air.
10.4  outcome of decompounding :
hydrogen sulfide of strong  toxicity

Section 11: TOXICOLOGICAL INFORMATION  ..........Strong  toxicity
Section 12:ECOLOGICAL  INFORMATION
   
        
ECOLOGICAL toxicity : Strong alkalescence , sulf-,  water pollution,
                    especial  notice of  plant and hydrophyte.

Section 13: : DISPOSAL CONSIDERATIONS
 
13.1 
 Speciality of trashtoxicity  
13.2    method of disposal :reaction with iron powder in water, then
            diluting, at last coming into the system of waste water.
13.3  notice of disposal:  refer to concerned rule of law before   disposing.

Section 14: TRANSPORT INFORMATION
 
14.1    CODE OF DANGEROUS  CARGO: refer to 95007
14.2 PACKING MARK : Corrosive
14.3
Packing Group:  II
14.4  Packing  Method :
Net 25/900/1000kg PE bag.
  two layer polyethylene bag with
containing a sealed PE liner.
 or Iron (steel) barrel.
14.5 notice of
TRANSPORT:
  Forbidding TRANSPORTING TOGETHER WITH acid,  flammable, food, and
Corrosive.
 Avoid solarization, drench, be heated. Keep packing in good condition.

 
Section 15: rule of law information
       Safety Management Rules of Dangerous Chemical Goods(
 State Department NO. 344, putting  in practice since 2002.3.1).
   
Rules of Safe Using Chemical Goods in work area ([1996] NO.X issued by Labor Department)and so on. 
   Those Rules have corresponding regulation about Chemical Goods of safe using ,producing, depositing ,transporting. State Standard GB13690-92《Class and Mark of Usuall Chemical Goods》.this Specification is compiled according to State Standard 16483-2000 《 Rules of Compiling Specification of  Safy technology of Chemical Goods 》.

Section 16: Other information
      Reference literature:
      A.  ZhouGuoTai  
Total Specification of  Safy technology of Chemical Goods》       Press of Chymistry and Industry 1977
   B. ZhangWeiFan 《Safy Manual of Usuall dangerous Chemical Goods》
                      Press of oil of China 1998.

Issue time :Year:2004.Month :11.Day : 20
Issued By:  Henan Yindu Chemical CO.,LTD
modification: Second

     

河南殷都化工有限公司 版权所有(C)2005 网络支持 中国化工网 全球化工网 生意宝